Pure solid wood doors are natural wood taken from forests to do the door core, skim drying, and then by cutting, planing, mortising, drill, high-speed machining processes from wash-shaped. Pure solid wood doors are mostly chosen precious wood, such as cherry, peach core, walnut, rubber wood, golden teak, oak, etc., with no deformation, corrosion resistance, no seam, and thermal insulation characteristics. Meanwhile, solid wood doors with good sound absorption, effectively play a sound effect. High-grade solid wood door relative water content of about 8%, wood plastic composite in colombia, not easy to crack and deformation, the use of time will be longer. But because it is prepared from natural wood monolith, and thus have a relatively large color appears small contraction joints and other shortcomings.
Solid wood doors of the door core mostly pine, fir, etc. made by bonding or Meranti MDF board, with wood veneer finishes, after high temperature hot steel and solid wood edge lines. Advanced solid wood doors, door cores more quality fir, natural wood veneer surface hot wire 45-60 (equivalent to more than three times the decorative panels).
Due to the small Chinese Fir density, moisture content and easier to control, wood plastic dustbin suppliers in dubai, and thus finished doors good stability, easy to crack and deformation. In addition, solid wood doors also have insulation, impact resistance, flame retardant properties, and sound effects with pure solid wood doors is basically the same. Molded door with two high-density fiber molded door skins strip modeling and simulation of grain by mechanical repression.
The molded door manufacturing is the use of plantation timber, peeled, sliced, screening, grinding into a dry fiber mix after the adhesives and paraffin wax at high temperature molding time. From this perspective the process, plywood door molded door also belongs, wood plastics composites advantages, but is used in the door panels molded high-density fiber board. Ordinary plywood doors with wood, perforated plates, high density board as door core, both sides of the flat portion of the door panel with a decorative stick is pressed against the frame groove part with veneer or cardboard paste, processed from. This door light quality, low price, but limited by the process, the larger the surface color, only around the door veneer, cardboard or wood nailed Edge.
Please sign in to leave a comment.